Need help?Do you have a question about the Tektronix TDS2014 and is the answer not in the manual?
General| Channels | 4 |
|---|---|
| Bandwidth | 100 MHz |
| Sample Rate | 1 GS/s |
| Record Length | 2.5k points |
| Vertical Resolution | 8 bits |
| Vertical Sensitivity | 2 mV/div to 5 V/div |
| Timebase Range | 5 ns/div to 50 s/div |
| Display Resolution | 320 x 240 pixels |
| Display | 5.7 inch color LCD |
| Trigger Types | Edge, Video |
| Interface | USB |
| Input Impedance | 1 MΩ |
| Power Requirements | 100 to 240 V |
Instructions for installing the oscilloscope, including power cord and security loop setup.
Guidance on probe checks, compensation, attenuation settings, and self-calibration routines.
Details on using Autoset, saving, and recalling oscilloscope setups for efficient operation.
Explains the role of triggering in waveform acquisition and basic trigger settings.
Covers acquisition modes, time base settings, and waveform scaling/positioning for display.
Explains the elements, icons, and readouts within the oscilloscope's main display area.
Details on vertical, horizontal, trigger, and general control buttons and their functions.
Guides on simple, automatic, and cursor measurements, including pulse and rise time analysis.
In-depth explanation of horizontal settings, trigger controls, and their associated options.
Steps for setting up time-domain waveforms and displaying FFT spectra with various options.
To Next Page
