Tektronix TDS2014 User Manual

Operating Basics
TDS1000/2000-Series Digital Oscilloscope User Manual
31
Message Area
The oscilloscope displays a message area (item number 15 in the
previous figure) at the bottom of the screen tha t c onveys the
following types of helpful information:
H Directions to access another menu, such as when you push the
TRIG MENU button:
For TRIGGER HOLDOFF, go to HORIZONTAL Menu
H Suggestion of what you might want to do next, such as when you
push the MEASURE button:
Push an option button to change its measurement
H Information about the action the oscilloscope performed, such as
when you push the DEFAULT SETUP button:
Default setup recalled
H Information about the waveform, such as when you push the
AUTOSET button:
Square wave or pulse detected on CH1

Tektronix TDS2014 Specifications

General

Channels	4
Bandwidth	100 MHz
Sample Rate	1 GS/s
Record Length	2.5k points
Vertical Resolution	8 bits
Vertical Sensitivity	2 mV/div to 5 V/div
Timebase Range	5 ns/div to 50 s/div
Display Resolution	320 x 240 pixels
Display	5.7 inch color LCD
Trigger Types	Edge, Video
Interface	USB
Input Impedance	1 MΩ
Power Requirements	100 to 240 V