Tektronix TDS200 Series - User Manual

Programmer Manual
TDS200-, TDS1000-, and
TDS2000-Series
Digital Oscilloscope
071-1075-00
This document supports TDS210 and TDS220
with FV:v1.09 and above when used with
TDS2CM version CMV:v1.04 and above, or
TDS2CMA and TDS2MM any version; TDS224,
TDS1000- and TDS2000-series, all versions
www.tektronix.com

Tektronix TDS200 Series Specifications

General

Channels	2 or 4
Memory Depth/Record Length	2.5k points
Input Coupling	AC, DC, GND
Timebase Accuracy	50 ppm
Display	5.7-inch color LCD
Vertical Resolution	8 bits
Trigger Modes	Edge, Video, Pulse
Math Functions	Add, Subtract, Multiply, FFT
Maximum Input Voltage	300 Vrms
Power Requirements	100-240 VAC, 45-66 Hz
Bandwidth	100 MHz
Vertical Sensitivity	2 mV/div
Timebase Range	5 ns/div
Connectivity	USB
Input Impedance	1 MΩ