Tektronix TDS2014 User Manual

Reference
TDS1000/2000-Series Digital Oscilloscope User Manual
111
Key Points
Self Calibration. The self calibration routine optimizes the oscilloscope
accuracy for the ambient temperature. For maximum accuracy, you
should perform a self cal i f the ambient temperature changes by 5° C
or more. Follow the directions on the screen.
System Status
Selecting System Status from the Utility Menu displays the menus
available for obtaining a list of control settings for each group of
oscilloscope controls.
Push any front-panel menu button to remove the status screen.
Options Comments
Horizontal Lists horizontal parameters of channels
Vertical Lists vertical parameters of channels
Trigger Lists trigger parameters
Misc Lists the model of the oscilloscope and the software version
number
If the TDS2CMA module is installed, lists values of the
communications parameters

Tektronix TDS2014 Specifications

General

Channels	4
Bandwidth	100 MHz
Sample Rate	1 GS/s
Record Length	2.5k points
Vertical Resolution	8 bits
Vertical Sensitivity	2 mV/div to 5 V/div
Timebase Range	5 ns/div to 50 s/div
Display Resolution	320 x 240 pixels
Display	5.7 inch color LCD
Trigger Types	Edge, Video
Interface	USB
Input Impedance	1 MΩ
Power Requirements	100 to 240 V