Tektronix TDS2022C Security Instructions

Clear or sanitize a non-functional instrument
If your instrument is not functioning and you need to clear or sanitize it, complete
the following procedures.
Acquisition board
Remove the Acquisition board and return the product to Tektronix. A new
Acquisition board will be installed, and the instrument will be repaired and
adjusted as necessary.
For removal instructions, refer to your product service manual (manual part
numbers are listed under Required documents near the front of this manual.
After removal of the Acquisition board, refer to your company's internal policies
regarding handling or disposal of the board.
Compact flash card (TPS oscilloscopes only)
Remove the compact flash card and return the instrument to Tektronix for repair.
After removal of the compact flash card, refer to your company's internal policies
regarding handling or disposal of the compact flash card.
USB flash drive (TBS and TDS oscilloscopes only)
Remove the USB flash drive and return the instrument to Tektronix for repair.
After removal of the USB flash drive, refer to your company's internal policies
regarding handling or disposal of the flash drive.
Charges
Replacement of any missing hardware will be charged according to the rate at the
time of replacement.
Declassification and Security Instructions 9

Tektronix TDS2022C Specifications

General

Bandwidth	200 MHz
Sample Rate	2 GS/s
Channels	2
Record Length	2.5 kpoints
Timebase Range	5 ns/div to 50 s/div
Math Functions	Add, Subtract, Multiply, Divide, FFT
Input Coupling	AC, DC, GND
Vertical Resolution	8 bits
Trigger Modes	Auto, Normal, Single
Memory Depth	2.5 kpoints
Display	5.7-inch color LCD
Input Impedance	1 MΩ
Trigger Types	Edge, Pulse, Video
Display Resolution	320 x 240 pixels
Connectivity	USB
Automatic Measurements	Frequency, Period, Rise Time, Fall Time
Power Supply	100-240 VAC
Time Base	5 ns to 50 s