15
TRIPLOG. Triplog provides a
time/distance calculation, based
on input from the optional speed
accessory. The timer is started
when the unit is first powered on,
and distance information is
collected to provide elapsed
distance since power-up, and the
average speed. To enable the
Triplog display, press the
UP OR
DOWN
arrow button.
Triplog can be reset at any time by
pressing the
UP OR DOWN arrow
button. Press
MENU to return to
the normal screen.
Note: The optional Speed &
Temperature accessory must
be connected for the Triplog
menu to be available.
USING THE 100ID SERIES
MENU FUNCTIONS
Triplog On
To Next Page
Loading...