Telefunken HS 860 User Manual

TELEFUNKEN SERVICE
PHONO
RECORD PLAYER
TOURNE-DISQUE
DRUCK-NR. 319 488 304 PGC
ACHTUNG! Ersatzteilbestellungen
sind schnelier und kostengunstiger Uber
Btx = 381000080 #
(Nur in der Bundesrepublik Deutschland
und West-Berlin)
HS 860
Schaltplan — Lageplan — Service-Hinweise — Ersatzteile
Schematic Diagram — Component Layouts —Service Adjustments — Spare Parts
Schéma — Plan de localisation — Réglages de service — Pieces de rechange
Technische Daten
Netzspannung.......... 220V (110V)
Netzfrequenz........... 50 Hz
Leistungsaufnahme...... 1,5 VA bei 220V/50 Hz
Plattenteller............ Alulegierung, 304 mm ©
Gewicht 0,4 kg
Drehzahien............ 33/3, 45 U.p.m.
Gieichlauf (DIN 45545)... $0,12%
Rumpel-Gerausch-
spannungsabstand .... 263 dB
Technical Data
Mains Voltage.......... 220V A.C. (110 V A.C.)
Mains frequency ........ 50 Hz
Powerconsumption...... 1,5 VA at 220 V/50 Hz
Turnable .............. 304 mm ¢.
weight 0.4 kg
Speeds ............... 33/3, 45 rpm
Wow and flutter
(DIN45545),......... 30,12 %
Caractéristiques techniques
Tensionsecteur......... 220V (110V)
Fréquence secteur ...... 50 Hz
Gonsommation ......... 1,5 VA & 220 V/50 Hz
Plateau.........000... 304mm ©,
poids 0,4 kg
Vitessede rotation....... 33/3, 45 min”! (t/min)
Pleurage et scintitlement
(DIN45545).......... S0,12%
eff. Tonarmlange........ 211mm
Frequenzgang.......... 20—20000 Hz + 2dB
Tonabnehmersystem .... Ortofon M5
Diamant............... spharisch, ATN 3600
Nadeinachgiebigkeit
(Compliance)......... 3.5x 10° Scm/Dyn.
Auflagekraft............ 25 MN (2.5 p)
MafBe (B/H/T) .......... 440x 115x384 mm
Gewicht............... 4kg
S/N Ratio... 0.0.2.0... 2 63 dB
Effective tone armienght.. 211mm
Frequency response ..... 20 Hz~20 kHz + 2dB
Cartridge.............. Ortofon M5
Stylus ......00.....0.. spheric. ATN 3600
Compliance............ 3.5x 10°§ cm/Dyn.
Pressure .............. 25 mN (2,5 p)
Dimensions (W/H/D)..... 440x 115x384 mm
Weight................ 4kg
Rapport signal/Bruit ..... 2 63 dB
Longueur effective du bras 211mm
Bandepassante ........ 20 Hz-—20 kHz + 2dB
Systeme de pick-up...... Ortofon M5
Diamant............... sphérique, ATN 3600
Compliance........ ... 3.5x 1078 om/Dyn.
Force d'appuiconseillée .. 25 mN (2,5 p)
Dimension (L/H/P) ...... 440x 115x384 mm
PONDS ce aes Lar os 4kg

Telefunken HS 860 Specifications

General

Brand	Telefunken
Model	HS 860
Category	Turntable
Language	English

Summary

Technical Data

Mains Voltage

Specifies the operating voltage range of the device.

Mains Frequency

Indicates the required AC frequency for operation.

Power Consumption

Details the electrical power usage of the unit.

Turntable Specifications

Describes the platter material, diameter, and weight.

Playback Speeds

Lists the supported rotational speeds for records.

Wow and Flutter

Measures speed stability according to DIN standards.

Effective Tone Arm Length

Specifies the measurement from the tonearm pivot to the stylus.

Frequency Response

Defines the audio frequency range the device can reproduce.

Cartridge and Stylus

Identifies the installed cartridge and stylus type.

Tracking Force

Details the recommended downward force for the stylus.

Physical Dimensions

Provides the unit's width, height, and depth.

Unit Weight

States the total weight of the record player.

Dismantling Hints

Component Removal Procedure

Step-by-step guide for disassembling the device.

Adjustment Points

Set Down Point Adjustment

Adjusting the tonearm's starting position on the record.

Switch Off Point Adjustment

Calibrating the automatic shut-off mechanism.

Tonearm Lift Height Adjustment

Setting the correct vertical distance for the tonearm lift.

Motor and Drive System

Speed Calibration DC 200-1

Procedure to adjust the rated speed for DC motor 200-1.

Speed Calibration DC 210-1

Procedure to adjust the rated speed for DC motor 210-1.

Electrical Schematics

Power Supply Version 1 Diagram

Electrical diagram for the first version of the power supply.

Power Supply Version 2 Diagram

Electrical diagram for the second version of the power supply.

Power Supply Board Wiring

Details on connections for the power supply board.

Tonearm and Bearing Procedures

Complete Tonearm Dismantling

Instructions for removing the entire tonearm assembly.

Tonearm Replacement Guide

Step-by-step process for replacing the tonearm.

Spare Parts List

Part Identification and Numbers

Comprehensive list of parts with unique identifiers and descriptions.

Component Location References

References to the physical placement of parts on diagrams.