Telefunken PDF 7322 - Resetting and Software Information

9
Non contractual document subject to change in case of typographical errors (Mktg0710) COPYRIGHT SOPEG 2010)
ENGLISH
- Resize
Select “Resize” using the “Up/Down” keys on the remote, then press the “Enter” key to choose “On” or
“Off”.
- Cut Out When Copy
Select “Cut Out When Copy” using the “Up/Down” keys on the remote, then press the “Enter” key to
choose “On” or “Off”.
- Show tip When Copy
Select “Show tip When Copy” using the “Up/Down” keys on the remote, then press the “Enter” key to
choose “On” or “Off”.
2. System configuration
This menu allows you to set the operating parameters of your frame.
- Light sensor on/off
Select “Light sensor” using the “Up/Down” keys on the remote, then press “Enter” key to choose “On” or
“Off”.
- Language
Select “Language” using the “Up/Down” keys on the remote and press “Enter”, then use the “Up/Down”
keys to choose between:
 English
 French
 German
 Italian
 Netherlands
 Portuguese
 Spanish
- Brightness
Select “Brightness” using the “Up/Down” keys on the remote and press “Enter”, then press the
“Left/Right” keys to adjust the brightness level (1-16).
- Contrast
Select “Contrast” using the “Up/Down” keys on the remote and press “Enter”, then press the
“Left/Right” keys to adjust the contrast level (1-16).
- Saturation
Select “Saturation” using the “Up/Down” keys on the remote and press “Enter”, then press the
“Left/Right” keys to adjust the saturation level (1-16).
- Tint
Select “Tint” using the “Up/Down” keys on the remote and press “Enter”, then press the “Left/Right”
keys to adjust the tint level (1-100).