10
Non contractual document subject to change in case of typographical errors (Mktg0710) COPYRIGHT SOPEG 2010)
ENGLISH
- Reset (Default)
If the frame is handled incorrectly, it may be useful to reset its default settings. To do so, select “Default”
using the “Up/Down” keys on the remote and press “Enter”, then use “Up/Down” keys to select “On” or
“Off”.
Note: After Resetting, the language selection screen will appear during the following start-up, just as it did
for its first use.
- Version number of the internal software (for information only)
V. Connecting to a computer
It is possible to transfer files to the frame by connecting it to your personal computer. To do so, connect
your frame via USB cable (mini-USB port on the frame, and standard USB port for the computer) to the
computer, then turn on your frame: the frame’s screen will show “PC connection...” Return to normal
operation after disconnecting.
On your computer, the following dialog box will appear:
- Click “Open folder and display files” in order to view the contents of the internal memory.
The following screen will appear:
To Next Page
Loading...
