32
6.2 Sleep mode
When listening to radio, press briey the SNOOZE / SLEEP /
DIMMER (7) button to enter the sleep mode.
You can set the sleep timer from 10 to 90 minutes in 10-minute
intervals. Do so by pressing repeatedly the SNOOZE / SLEEP
/ DIMMER (7) button. The unit will automatically turn off after
the preset time.
To disable the sleep mode press repeatedly the SNOOZE /
SLEEP / DIMMER (7) button until OFF is shown in the
display (12) or press the
(1) button.
7. RADIO OPERATION
7.1 Searching of radio stations
In standby mode (current clock time display mode), press
once the (1) button to turn on the radio mode. The display
shows the selected radio frequency before returning to current
clock time display mode.
Press the (3) button or (4) button to manually look for
a radio station. Each press changes the frequency by 0.1
increment/decrement (87.5 – 108 MHz).
To automatically look for a radio station, press and hold the
(3) button or (4) button for 2 seconds, the appliance will
automatically search for next available radio station.
Press once the (1) button to turn off the radio mode and to
return to the current clock time display mode.
7.2 Programming and recalling of radio stations
In standby mode (current clock time display mode), press once
the
(1) button to turn on the radio mode.
Find a radio station as described above.
To save the radio station that the radio is tuned to, press and
hold SET / MEM / M+ (2) button for few seconds. A free
memory space between
P01
and
P10
ashes on the LED
display (12).
Note: If the radio was never programmed or the battery was
replaced, the memory location
P01
will ash).
Press the SET / MEM / M+ (2) button to save the radio
station at the memory space.