Sheet 5
2.2 Electrical Absolute Ratings
2.2.1 TFT LCD MODULE
Note 1: Permanent damage to the device may occur if maximum values are exceeded. Functional
operation should be restricted to the conditions described under normal operating conditions.
2.2.2 Backlight Unit
Note 1:Permanent damage to the device may occur if maximum values are exceeded. Function operation
should be restricted to the conditions described under normal operating conditions.
Note 2: Specified values are for input of LED lightbar at Ta=25±2 ℃
(Refer to 3.2 for further Information).
EXPRESS LUCK INDUSTRIAL LTD.
mA
Unit
Note 1,2
─
Single LightBar Current
Max
27
496
Symbol
VL
IL
Value
Item
Single LightBar Voltage
─
Min
Production specification
5.5
Note
V
UNIT
V
ITEM SYMBOL MIN NOTE
Power Supply Module VCC
MAX
4.5 Note 1
Generated by Foxit PDF Creator © Foxit Software
http://www.foxitsoftware.com For evaluation only.