Sheet 5
2.2 Electrical Absolute Ratings
2.2.1 TFT LCD MODULE
Note 1: Permanent damage to the device may occur if maximum values are exceeded. Function
operation should be restricted to the conditions described under normal operating conditions.
2.2.2 Backlight Unit
Note 1:Permanent damage to the device may occur if maximum values are exceeded. Function operation
should be restricted to the conditions described under normal operating conditions.
Note 2: Specified values are for input of LED lightbar at Ta=25±2 ℃
(Refer to 3.3 for further Information).
EXPRESS LUCK INDUSTRIAL LTD.
mA
Unit
Note 1,2
─
Production specification
LED LightBar Current
Max
26.4
495
Symbol
VL
IL
Value
MAX NOTE
Note 1
LED LightBar Voltage
24
Min
Item Note
V
UNIT
V5.5
ITEM SYMBOL MIN
Power Supply Voltage VCC -0.3
VLogic Input Voltage Vlogic 3.25 3.9
PDF 文件使用 "pdfFactory Pro" 试用版本创建 www.fineprint.cn
To Next Page
Loading...
Need help?
General