English - 5 -
Remote Control RC 4875 (depending on the model)
Note: Functional button indications on some menu
screens may vary in accordance with the remote
control of your TV. Follow the button functions
located at the bottom of the screen.
1. Standby: Switches On / Off the TV
2. Numeric buttons: Switches the channel, enters
a number or a letter in the text box on the
screen.
3. TV: Displays channel list / Switches among
broadcast types / Switches to TV Source
4. Mute: Completely turns off the volume of the TV
5. Volume +/-
6. Menu: Displays TV menu
7. Navigation buttons: Helps navigate menus,
content etc. and displays the subpages in TXT
mode when pressed Right or Left
8. OK: Conrmsuserselections,holdsthepage(in
TXT mode), views channel list (DTV mode)
9. Back/Return: Returns to previous screen,
opens index page (in TXT mode)
10. Media browser: Opens the media browsing
screen
11. Info: Displays information about on-screen
content, shows hidden information (reveal - in
TXT mode)
12. My button 1 (*)
13. Coloured Buttons: Follow the on-screen
instructions for coloured button functions
14. Language: Switches between sound modes
(analogue TV), displays and changes audio/
subtitle language (digital TV, where available)
15. Subtitles: Turns subtitles on and off (where
available)
16. Rapid reverse: Moves frames backwards in
media such as movies
17. Record: Records programmes (optional)
18. Play: Starts to play selected media
19. Stop: Stops the media being played
20. Rapid advance: Moves frames forward in media
such as movies
21. Pause: Pauses the media being played, starts
timeshift recording
22. Screen: Changes the aspect ratio of the screen
23. Text: Displays teletext (where available), press
again to superimpose the teletext over a normal
broadcast picture (mix)
24. My button 2 (*)
25. EPG (Electronic programme guide): Displays
the electronic programme guide
26. Exit: Closes and exits from displayed menus or
returns to previous screen
27. Quick Menu: Displays a list of menus for quick
access
28. Internet: Opens the portal page, where you can
reach many web based applications
29. Programme +/-
30. Swap: Quickly cycles between previous and
current channels or sources
31. Source: Shows all available broadcast and
content sources
(*) MY BUTTON 1 & MY BUTTON 2:
These buttons may have default functions depending on
the model. However you can set a special function to these
buttonsbypressingonthemforvesecondswhenona
desiredsourceorchannel.Aconrmationmessagewillbe
displayed on the screen. Now the selected MY BUTTON is
associated with the selected function.
Note that if you perform First Time Installation, MY
BUTTON 1&2 will return to their default function.