Telematic PreView Top - Phone book; STORE; Use Phone book

12
1. Enter the number you want to store (on hook).
2. Hold the NAMN key down until the LED is turned on (there must be a
number on the display). A marker starts to flash at the first position for
the name.
3. Select character by the dial keys (according to below table).
Key
1 1 _ ” # $ % & ´ ( ) * + , - . /
2 A B C 2
3 D E F 3
4 G H I 4
5 J K L 5
6 M N O 6
7 P Q R S 7
8 T U V 8
9 W X Y Z 9
* Æ Ø *
0 Å Ä Ö 0
4. Press NAMN key to confirm character and step to next.
Press RADERA key to step to previous character.
5. Hold the NAMN-key down until the LED is turned on to store the whole
name.
If the number in the phone book starts with ”*” you have to key in an extra
* in the beginning of the number.
Example:
If *21*123456# should be stored in the phone book: Key in
**21*123456# (according to point 1 above). Then continue according
to points 2-5. The first * will be deleted and the result is *21*123456#.
This is only for the phone book and leading * in the number.
1. Press NAMN key to enter phone book (must be on hook).
2. Select name by scrolling (the records are in alphabetic order).
3. Lift the handset to dial.
STORE
Use Phone book
Phone book