13
Erase the shown number by pressing the RADERA key twice.
The whole CID memory will be erased if you hold the RADERA key
down for about 8 sec. while in CID scrolling.
Store a new number over any old number according to STORE above.
1. Press NAMN key.
2. Select the record you want to erase by the scroll keys.
3. Erase shown record by pressing RADERA key twice.
1. Press wanted memory M1, M2 or M3.
2. Lift the handset to dial the shown number.
1. Enter the number you want to store (on hook).
2. Hold the target memory key (M1 - M3) down until the LED is turned on.
Maximum 18 digits could be stored in each memory key.
Use SENASTE-key to get a pause in a number..
STORE
Memory M1 - M3
Dial M1 - M3
Erasing
CID Memory
Memory M1 - M3
Phone book
To Next Page
Loading...