The TELESTAR IR 200 is a versatile consumer electronics device designed for audio entertainment and media playback. It functions as a receiver for DAB, DAB+, and FM radio signals, an internet radio, and a media player capable of reproducing audio files from a USB data carrier, Bluetooth device, or network drive. It also offers the ability to record audio files onto a USB data carrier.
Important Technical Specifications:
- Internet Radio:
- Chipset: Magic M6, providing access to approximately 25,000 internet radio stations.
- Audio Codecs: Supports MP3 (bitrate up to 320 Kbits/s, sample rate up to 48 KHz), AAC/AAC+ (bitrate up to 320 Kbits/s, sample rate up to 48 KHz), and WMA (bitrate up to 320 Kbits/s, sample rate up to 48 KHz).
- Wi-Fi: UPnP/DLNA compatible, IEEE 802.11b/g, WPA/WPA2/WEP (64/128 bit key).
- DAB/DAB+/FM:
- Reception Range: DAB Band III 174 MHz - 240 MHz, FM 87.5 MHz - 108 MHz.
- Sensitivity: DAB: -100dBm, DAB+: -101dBm, FM: -100dBm.
- Display:
- Type: TFT Color Display.
- Size: 7.2 cm / 2.8 inches (2.8 inch LCD 240 x 320 pixels).
- Audio Output:
- Loudspeaker: (10W+10W Output Music Power) 3” loudspeaker, max. 10W 4Ω.
- Amplifier: STMicroelectronics BRIDGE AMPLIFIER.
- Sound Effects: Supports multi-sound effect EQ settings (NORMAL, FLAT, POP, JAZZ, ROCK, CLASSIC).
- Connections:
- Line Out: 3.5 mm Stereo jack.
- Headphone: 3.5 mm Stereo jack.
- AUX IN: 3.5 mm Stereo jack.
- LAN: 10/100 Mbps (RJ45).
- Power Supply: 12 Volt DC 3 A.
- Mains Adapter: 100 - 240 V AC 50/60 Hz.
- USB Port: USB 2.0 Standard.
- Battery (Remote Control): CR 2025 / 3 V.
- Dimensions (W x H x D): 320 mm x 135 mm x 152 mm.
- Weight: Approx. 1.9 Kg.
- Operating Conditions:
- Temperature Range: 0°C - 45°C.
- Humidity: 20% - 80% relative humidity.
- Power Consumption:
- Standby: 0.8 W.
- Operation: Max. 36 W.
- Storage Conditions: Store only in dry rooms.
Usage Features:
The TELESTAR IR 200 can be controlled via both the physical buttons on the device and the included remote control. For enhanced convenience, it can also be managed through the AirMusicControl App, available for Android® and iOS® operating systems, when connected to a network.
- Radio Modes: Easily switch between Internet Radio, DAB+, FM, UPnP, AUX, and USB modes using the "Mode" button on the device or remote.
- Station Presets: Store up to 5 favorite stations using dedicated memory keys (1-5) on the device. Additional favorites can be saved and accessed via the "FAV+" button on the remote.
- Network Connectivity: Connect to a network via LAN cable or integrated Wi-Fi for internet radio functionality and media streaming. The device supports WPS PBC for easy Wi-Fi setup.
- Media Playback: Play audio files from USB storage devices (FAT32 formatted) or UPnP/DLNA-enabled network devices.
- Alarm Clock: Set up to two alarms with customizable wake-up sources (tone, melody, internet radio, DAB+, FM, or USB music). A snooze function is also available.
- Sleep Timer: Configure the device to automatically switch off after a set period (15, 30, 60, 90, 120, 150, 180 minutes).
- Display Customization: Adjust display brightness (dimmer function) and switch between color and monochrome display.
- Language Selection: Choose the menu language from available options.
- Equalizer: Activate the equalizer function to select pre-set sound settings or configure custom bass and treble levels.
- Weather Information: When connected to the internet, display weather forecasts for a selected location and temperature unit in standby mode.
- System Information: View network details, including the MAC address, which is required for registering the device with the mymediaU service for personalized station lists.
- Software Update: Update the device's operating software via the USB interface using files downloaded from www.telestar.de.
- Factory Reset: Reset all settings to their original factory defaults.
Maintenance Features:
- Cleaning: Disconnect the device from the power supply before cleaning. Use a dry, soft cloth. Avoid liquids, solvents, or cleaning agents that could damage the surface or labels. Cleaning should not be performed by children.
- Battery Handling:
- Only use the specified battery type (CR 2025 / 3V for the remote).
- Ensure correct polarity when inserting batteries.
- Remove batteries if the device is not used for a long time.
- Immediately remove exhausted or leaking batteries.
- Keep new and used batteries out of reach of children.
- Never open, short-circuit, charge, or throw batteries into fire.
- Avoid exposing batteries to extreme heat or direct sunlight.
- Storage: When not in use, unplug the power adapter and store the device in a dry, dust-protected area. Remove batteries from the remote control during prolonged non-use.
The TELESTAR IR 200 is designed for indoor use only and is intended for private, non-commercial use. It complies with all required EU standards and carries the CE mark.
Need help?
To Next Page
General
