What to do if my Televes Diginova Boss Antenna has no picture or sound?
If your Televes Antenna is showing no picture or sound, ensure your TV is tuned to a valid local TV channel. Also, inspect the installation cable and connectors for any short circuits. Finally, verify the DC voltage at the PSU’s antenna connector.
How to improve poor picture quality on my Televes Antenna?
To improve the picture quality of your Televes Antenna, verify that there is a clear line of sight to the transmitter. If there are obstructions, remove them or find a better location for the antenna.
Details about the DIGINOVA BOSS antenna, including English and Spanish names and its function.
The specific reference number for the DIGINOVA BOSS antenna product.
Instructions for grounding antenna systems to protect against voltage surges and static charges.
Important safety warnings regarding power supply, proximity to power lines, and product modifications.
List of items included with the antenna package, such as power supply and watertight cover.
Details on the antenna's Yagi UHF design, Microstrip technology, and BOSS-Tech system.
Guidance on mast installation, polarity, and coaxial cable handling, including bending radius and staples.
Instructions for installing the indoor power supply and connecting the antenna system, referencing diagrams.
Explanation of active and passive modes for the BOSS-Tech system and how to select them.
A guide to diagnose and solve common problems like non-functioning, no picture/sound, or poor picture quality.
Details of the 90-day limited warranty, exclusions, and customer rights.
Detailed technical data including operating bands, gain, noise figure, output level, power, and dimensions.
Guides to determine the correct antenna zone for UHF and High-VHF reception based on location.
FCC compliance statement and supplementary information regarding the product's adherence to regulations.
To Next Page
General
