Televes MIMO evoca TV-130990 User Manual

TO TV
TO ANT
USB
MIMO Antenna
TV-130990
1
WITH A SUPPORT
Attach the plate
E
in the right position as
shown in the pictures. Screw it to the antenna
A
using both screws
D
.
Place the antenna in a vertical position and attach
it to the mast using the clamp
B
and the nuts
C
.
B
NEEDED TOOLS
10mm wrench
Screw driver
(not included)
PH #2
Installation
C
Contents of the box
Assembly, operation, and maintenance instructions
A
D
E
Mast mount
A
E
E
B
C
PH #2
D
By
F
G H

Televes MIMO evoca TV-130990 Specifications

General

Front-Back Ratio	>20 dB
Input Impedance	75 Ohm
LTE Filter	Yes
Polarization	Horizontal / Vertical
Connector	F type
Operating Temperature	-40°C to +60°C

Summary

Installation

Mast Mount

Instructions for attaching the antenna to a mast using the provided clamp and nuts.

Table Mount

Guidance on positioning the antenna on a table, with or without a reflector.

Wall Mount

Steps for securely attaching the antenna and reflector to a wall.

Connection

Details on connecting the antenna system to power and signal sources.

Safety Instructions

Lightning Protection

Essential guidelines for grounding the antenna system to protect against voltage surges.

Warnings

Important precautions and warnings regarding product usage and safety.

Antenna Selector

Zone Information

Details on identifying the correct zone for antenna reception based on location.