Televes OLT 769401 - Slot Sub-Node

EN
239
Fan Nr FAN current working speed (RPM)
Table 7-102: “show” command output table parameters
7.6.6.2.4 “showcong” command
Name showcong
Description Print the command list that enforces the current conguration
Full path /equipment/boards/showcong
Mandatory Parameters This command has no parameters
Screen Output
Full command(s) path and used arguments and values to reach the current
conguration.
Table 7-103: “showcong” command information
/cli/equipment/board> showcong ?
Usage:
SHOWCONFIG Print the command list that enforces the current conguration
Figure 7-127: CLI on line help on “showcong” command usage in this node context
7.6.6.3 “slot” sub-node
7.6.6.3.1 “apply” command
Name apply
Description Applies the current conguration to the HW
Full path /equipment/slot/apply
Mandatory Parameters This command has no parameters
Screen Output No
Table 7-104: “apply” command information
/cli/equipment/slot> apply ?
Usage:
APPLY Applies the current conguration to the HW
Figure 7-128: CLI on line help on “apply” command usage in this node context
7.6.6.3.2 “cong” command
Name cong
Description Congure HW slots (not immediately applied)
Full path /equipment/slot/cong
Mandatory Parameters --mode
Screen Output No
Table 7-105: “cong” command information