Televes OLT 769401 - Show Command; Showconfig Command

Descripción del producto
258
7.6.9.5 “show” command
Name show
Description Show the current conguration.
Full path /gpon-protection/show
Mandatory Parameters No
Screen Output Table, Figure 7-; tables’ parameters description in Table 7-.
Table 7-141: “show” command information
cli/gpon-protection> show ?
Usage:
SHOW Show the current conguration
[OPTIONAL]
--ID Identies a table entry by ID, in this context.
Figure 7-168: CLI on line help on “show” command usage in this node context
Figure 7-169: Output of ”show” command without arguments in this node context
Parameter Group Parameter Description
ID GPON Type B protection group Id
Admin GPON Type B protection group administrative state
Mode 1to 1
Interface Working
Slot Identies the Working slot
Port Identies the Working Interface
Interface Protection
Slot Identies the Protecting slot
Port Identies the Protecting Interface
Reversible Indicates if reversion is enabled (enable|disable)
WTR (min) Wait to restore (5..12) min
Hold O (x100ms) Hold O Time (0 to 100) (x100ms)
Table 7-142: “show” command without arguments output table parameters
7.6.9.6 “showcong” command
Name showcong
Description Print the command list that enforces the current conguration
Full path /gpon-protection/showcong
Mandatory Parameters This command has no parameters
Screen Output
Full command(s) path and used arguments and values to reach the current
conguration.
Table 7-143: “showcong” command information