Chapter 1: Introduction
Introduction to your Router
The TeleWell TW-EAV510 AC v2 is a fibre-ready ADSL2+/VDSL modem, an all-in-one advanced
device integrating Wireless-AC 1300Mbps, 1000 Mb Ethernet, 3G/4G/LTE, and NAS (Network
Attached Storage) in one unit. As well as being IPv6-capable, the TeleWell TW-EAV510 AC v2
ADSL2+ router supports super fast fibre connections via dual-WAN connectivity through a Gigabit
Ethernet WAN port. Also, it also has a USB port, allowing the device to act as a print server as well as
a NAS (Network Attached Storage) device with DLNA (Digital Living Network Alliance). Moreover, the
USB port can host a 3G/4G/LTE modem connecting to the 3G/4G/LTE network for Internet access.
With an array of advanced features, the TeleWell TW-EAV510 AC v2 delivers a future-proof solution
for ADSL2+ connections, super fast FTTC and ultra-speed FTTH (Fibre-To-The-Home) network
deployment and services.
Maximum wireless performance
With an integrated 802.11n Wireless Access Point, the router delivers up to 6 times the speed of an
802.11b/g/n ac network device. It supports a data rate of up to 300Mbps and is also compatible with
802.11b/g/n ac equipment. The Wireless Protected Access (WPA-PSK/WPA2-PSK) and Wireless
Encryption Protocol (WEP) features enhance the level of transmission security and access control
over wireless LAN. The router also supports the Wi-Fi Protected Setup (WPS) standard, allowing
users to establish a secure wireless network by simply pushing a button. If your network requires wider
coverage, the built-in Wireless Distribution System (WDS) repeater function allows you to expand your
wireless network without the need for any external wires or cables.
3G/4G/LTE Mobility and Always-on Connectivity
With 3G/4G/LTE-based Internet connection (requires an additional 3G/4G/LTE USB modem plugged
into the built-in USB port), user can access internet through 3G/4G/LTE, whether you are seated at
your desk or taking a cross-country trip. The auto fail-over feature ensures optimum connectivity and
minimum interruption by quickly and smoothly connecting to a 3G/4G/ LTE network in the event that
you ADSL/Fibre/Cable line fails. The TeleWell TW-EAV510 AC v2 will then automatically reconnect to
the ADSL/Fibre/Cable connection when it is restored, reducing connection costs. These features are
perfect for office situations when a constant and smooth WAN connection is critical.
IPv6 supported
Internet Protocol version 6 (IPv6) is a version of the Internet Protocol that is designed to succeed IPv4.
IPv6 has a vastly larger address space than IPv4. This results from the use of a 128-bit address,
whereas IPv4 uses only 32 bits. The new address space thus supports 2128 (about 3.4×1038)
addresses. This expansion provides flexibility in allocating addresses and routing traffic and eliminates
the primary need for network address translation (NAT), which gained widespread deployment as an
effort to alleviate IPv4 address exhaustion.
The TeleWell TW-EAV510 AC v2 fully supports IPv6 (Internet Protocol Version 6), launched as the
current IPv4 range is filling up, and IPv6 is gradually becoming the indispensable addressing system
for savvy cloud computing users. Dual stack means the router is capable of running IPv4 and IPv6 in
parallel during the transition period. With TeleWell IPv6 enabled devices, three major transition
mechanisms such as Dual-Stack, Dual-Stack Lite, and 6RD (IPv6 rapid deployment) are supported to
be adapted easily into service provider’s IPv4/IPv6 network
To Next Page
Loading...