Management
- Web-based GUI for remote and local management (IPv4/IPv6)
- Firmware upgrades and configuration data upload and download via web-based GUI
- Embedded Telnet server for remote and local management
- Supports DHCP server / client / relay
- Supports SNMP v1,v2, MIB-I and MIB-II
- TR-069 supports remote management
- Available Syslog
- Mail alert for WAN IP changed
- Auto failover and fallback
- Push Service
Physical Interface
- WLAN: 5 x 3dbi internal antenna
- DSL: ADSL / VDSL port
- USB 2.0 port for DLAN, printer server and 3G/4G/LTE dongle
- Ethernet: 4-port 10/100/1000 Mbps auto-crossover (MDI / MDI-X) Switch
- Factory default reset button
- WPS push button
- Power jack
- Power switch
Package Contents
- TW-EAV510 AC v2 router
- Quick Start Guide
- CD containing English manual
- RJ-45 Cat. 5e STP Ethernet cable
- RJ-11 ADSL/ telephone cable
- Power adapter
- Splitter / Micro-filter (Optional)
Important note for using this router
Do not use the router in high humidity or high temperatures
Do not use the same power source for the router as other equipment.
Do not open or repair the case yourself. If the router is too hot, turn off the power immediately and
have it repaired at a qualified service center.
Avoid using this product and all accessories outdoors
Warning
Do not use the router in high humidity or high temperatures.
Do not use the same power source for the router as other equipment.
Do not open or repair the case yourself. If the router is too hot, turn off the power immediately and
have it repaired at a qualified service center.
Avoid using this product and all accessories outdoors.
Place the router on a stable surface.
Only use the power adapter that comes with the package. Using a different voltage rating power
adapter may damage the router.
To Next Page
Loading...