3. Use a cotton swab or a soft, lint-free cloth lightly dampened (not
saturated) with isopropyl alcohol to clean the tape heads, pressure
roller, and capstan in each well. When cleaning the pressure roller
and capstan, place the cotton swab in contact with the surface
farthest away from the tape head as shown in Figure 2.
4. After you finish, press the
Stop
button to exit from the cleaning
mode.
14
PRESSURE
ROLLER
CAPSTAN
TAPE
HEADS
Figure 2. Tape Head, Capstan and Pressure Roller Cleaning
To Next Page
Loading...