Telit Wireless Solutions LM940 - Symbol Conventions; Related Documents

LM940 Hardware Design Guide
1VV0301352 Rev. 18 Page 10 of 75 2022-01-04
Not Subject to NDA
Symbol Conventions
Danger: This information MUST be followed or catastrophic
equipment failure or personal injury may occur.
Warning: Alerts the user on important steps about the module
integration.
Note/Tip: Provides advice and suggestions that may be useful when
integrating the module.
Electro-static Discharge: Notifies the user to take proper grounding
precautions before handling the product.
Table 1: Symbol Conventions
All dates are in ISO 8601 format, that is YYYY-MM-DD.
Related Documents
• LM940 SW User Guide, 1VV0301343
• LM940 AT Commands Reference Guide, 80545ST10791A
• Generic EVB HW User Guide, 1VV0301249
• LM940 Interface Board HW User Guide, 1VV0301384
• SIM Integration Design Guide Application Note Rev10, 80000NT10001A
• Antenna Detection Application Note, 80000NT10002A