Double Check Radio Link
%
Press three times.
Press to go to “04”.
%
Press once.
Screen shows 1 sensor learned.
Press the “%”
three times in a
row, the screen should show “00”.
Press the UP arrow until you
reach “04”.
Press “%”
once.
The screen should now show the
number of sensors linked to this
thermostat, should be “1”.
After a few seconds, the screen
will return to the normal
temperature setting display.
To be sure the thermostat has learned this sensor, check the
number of sensors in the thermostat’s memory:
To Next Page
Loading...
