About This Manual
About This Manual
This chapter discusses the objectives and intended audien ce of this manual, Tellabs
®
8600
Managed Edge System Tellabs
®
8609 Access Switch and Tellabs
®
8611 Access Switch Interface
Configuration Guide and consists of t he following sections:
• Objectives
• Audience
• Related Documentation
• Conventions
• Documentation Feedback
Objectives
This manual provides an overview of the Tellabs 8609 access switch and Tellabs 8 611 access switch
interface functions and instructions on how to configure them using Command-Line In terface (CLI)
and ASCII textual commands with a router’s co nsole or remote term in al (Telnet).
Audience
This manual is designed for administration personnel for c onfiguring the Tellabs 8609 access switch
and Tellabs 8611 access switch interface functions with CLI. On the other hand, Tellabs
®
8000
Intelligent Network Manager provides access to equal functionality for administration personnel
with a graphical user interface.
It is assumed that you have a basic understanding of networks and network interfaces of different
technologies (ATM, PDH, PPP, Ethernet).
Related Documentation
The document numbering scheme consists of the docu men t ID, indicated by num bers, a nd the
document revision , indicated by a letter. The references in the Related Documentation table below
are generic and include only the docum ent ID. To make s ure the referen ces po int to the latest
available document versions, please refer to the relevant pro duct document program on the Tellabs
Portal by navigating to www.portal.tellabs.com > Product Docum entation > Data Networking >
Tellabs 8600 Managed Edge System > Technical Documentation.
Tellabs
®
8600 Managed Edge System
Hardware Installation Guide (76.8600-40039)
Provides guidance on mechanical installation,
grounding, powering, cabling and maintenance.
Tellabs
®
8600 Managed Edge System FP1.0
Tellabs
®
8609 Access Switch Reference
Manual (76.8610-40086)
Describes network element features: enclosure,
baseboard, interfaces and power supply modules.
Tellabs
®
8600 Man aged Edge System 76.8610-50149A
Tellabs
®
8609 Access Switch FP1.0 Tellabs
®
8611 Access Switch FP1.1 Interface Configuration Guide © 2011 Tellabs.
10
To Next Page
Loading...
Need help?
General
