What to do if Tellur Headsets cannot be searched or pairing fails?
If your Tellur Headsets cannot be searched or pairing fails, it might be because the headset hasn't entered pairing mode. To fix this, enable the headset to enter pairing state. Also, the Bluetooth application of your cellphone might be in error, in that case close the cellphone and start again the pairing process.
Why my Tellur Headsets power on function failed?
If the Tellur Headsets power on function failed, ensure the battery isn't discharged by using the charger to fully charge the battery and press the MFB button longer. Also, check that the toggle switch is in the right position, push the toggle switch again.
What to do if Tellur Headsets power off function failed?
If the Tellur Headsets power off function failed, it might be that the headset program is in error due to an incorrect operation. Use the charger to charge and reset the headset.
How to fix Tellur Headsets charging function failed?
If the Tellur Headsets charging function failed, the charging port is not properly connected. Reconnect the charging port.
Instructions for powering on the headset and initiating the Bluetooth pairing process.
Steps to connect the headset to a mobile phone via Bluetooth.
Guidelines for maintaining the battery and the process for charging the headset.
Solutions for problems related to powering on and charging the headset.
Solutions for issues where the headset cannot be found or fails to pair.
Warning about potential hearing damage from prolonged exposure to high volumes.
To Next Page
General
