tellus UP100J - Pre-Installation Checklist; Box Contents and Required Items

One (1) UP100J Station Head with
attached charging cables, couplers and base plate
One (1) Pin in hex security bit
Two (2) Pin in hex security bolts
One (1) Installation Manual
Base plate
Hardware
Set
Station housing posts must be ordered separately:
Pedestal
(UP-PMP)
Wall & Pole
(UP-WMP)
(UP-CMP)
Direct Burial
(UP-DBP)
Cover
(UP-COV)
The following tools may be needed:
- Short driver handle (for standard bits)
- Right-angle driver ratchet (for standard bits)
- Set of SAE wrenches
- Hole cutting drill bits to match conduit size
- Spirit Level
- Smart phone + “GPS coordinate converter” app
- Internet connected browser (tablet or laptop)
The following hardware may also be needed:
- Wall anchors and fasteners
- Washers
- Pad mount concrete anchors
- Anchor security hardware
Box contents
Other Items may be required for installation:
Page 4
Before You Start:
4B
4A
Other Items may be required for installation:
4B
KIT302-IM-20140501