To Next PageTo Next Page
Need help?Do you have a question about the tellus UP100J and is the answer not in the manual?
General| Input Voltage | 100-240V AC |
|---|---|
| Output Voltage | 5V |
| Charging Ports | 2 |
| Compatibility | Smartphones, Tablets, and other USB devices |
| Protection Features | Over-current protection, Over-voltage protection, Short-circuit protection |
Comprehensive safety warnings including electrical shock, damage, qualifications, grounding, and modifications.
Cautions for operation, adverse conditions, repair, and liability limitations.
Details on electrical configurations, voltage, current, connectors, and network interfaces.
Information on operating temperature, humidity, enclosure rating, interface devices, and physical strength.
Specifications for available post dimensions for mounting the charging station.
Lists items included in the box and other necessary items like tools and hardware for installation.
Explains wiring options for single-phase split, delta-connected, and wye-connected 3-phase services.
Guidance on site planning, power conduit, and data conduit sizing and installation.
Instructions for pulling electrical conductors and Cat5 data cables through conduits.
Steps for preparing and attaching the base plate to the station housing.
Instructions for safely unpacking the head unit, retaining packaging, and repacking if necessary.
Detailed steps for inserting the station head into the housing and connecting the grounding strap.
Instructions for connecting power wires, ground conductor, and data cable to the station head.
Guidance on testing signal strength, network options (Verizon, ATT, Building Router), and data cable installation.
Steps for powering on, entering station ID, and performing network auto-detection for master and client stations.
Instructions for collecting GPS readings, site details, and registering the station online.
