Need help?Do you have a question about the Telrad CPE8100 and is the answer not in the manual?
Warns about concentrated energy from directional antennas and proximity to the front.
Advises checking power source voltage against instrument requirements before connection.
Details common LTE interface features for CPE8100/CPE8101, including compliance, bands, and modulation.
Lists key features of the CPE 8101, including frequency bands, UE category, Tx power, and dimensions.
Provides detailed electrical and physical specifications for the CPE 8101, including interfaces, antenna, and environment.
Details the specifications for the CPE8101 PoE adapter, including power source and output power.
Guides on how to mount the CPE8100 Outdoor Unit on a pole.
Explains how to establish the initial device logic connection for the CPE8101.
Allows configuration of the CPE firewall, including SPI Firewall and WAN request blocking.
Allows configuration of port range forwarding rules for applications in router mode.
Enables configuration of specific port forwarding rules for applications in router mode.
Configures Demilitarized Zone (DMZ) and Universal Plug and Play (UPnP) for port forwarding.
Configures port triggering to map specific port ranges to different port ranges for protocols.
Enables firmware upgrade via Web GUI, with options for local or remote upgrades and factory resets.
Enables rebooting the device or restoring it to factory defaults.
Addresses common problems like PC not connecting to the CPE or not acquiring an IP address.
Covers troubleshooting CPE networking issues and resetting the unit to factory default or forgotten password.
To Next Page
General