Need help?Do you have a question about the Telrad CPE8101 and is the answer not in the manual?
Instructions for installing the outdoor unit (ODU) on a pole.
Mounting the ODU on a wall, header connection, and grounding procedures.
Explains LED indicators and how to adjust antenna for optimal signal strength.
Instructions for installing the outdoor unit (ODU) using a clamp.
Explains ODU LED indicators and antenna adjustment for signal strength.
Instructions for logging into the CPE via web browser and overview of LTE configuration.
Configuring Network Discovery and Selection modes and PLMN list for network attachment.
Configuring cell selection and operator APN profiles.
Viewing SIM card status and managing PIN code for SIM card security.
Configuring internet connection modes and LAN IP, DHCP server settings.
Configuration details for router/NAT mode, including NAT and interface settings.
Configuration details for L2 bridge mode, including MTU, IP type, and L2 GRE VPN.
Configuring the CPE firewall, SPI firewall, and Application Layer Gateways.
Defining access policy for LAN devices, including URL blocking.
To Next Page
General