Telrad CPE8101 - 1 Overview; Cpe 8100\Cpe 8101 - Common Lte Features

Page 9
1. Overview
CPE8100/CPE8101 is a high performance LTE CPE family (Customer
Premises Equipment) product designed to enable quick LTE service
deployment to the remote customers. It provides high data throughput and
networking features to end users who need both bandwidth and data
roaming capabilities in the remote area.
 CPE 8100\CPE 8101 – Common LTE Features
LTE Interface
Standard Compliance
3GPP Rev. 9, UE Cat 4
3GPP Rev. 9, UE Cat 5 (Telrad BS Only)
Duplex Mode
TDD
Frequency Bands
B40 (2.3-2.4GHz), B41(2.4-2.7GHz)
3.3-3.4GHz, B42 (3.4-3.6GHz), 43 (3.6-3.8GHz)
Channel bandwidth
(MHz)
*5, 10, *15, 20
*note only 10/20MHz supported on part 96 certified CPE8100
Modulation
DL: MCS1 - MCS28 (QPSK, 16QAM, 64QAM)
UL: MCS1 – MCS28 (QPSK, 16QAM, 64QAM)
Uplink 64QAM with Telrad eNodeB
L1
MIMO TM1, TM2, TM3,TM4 ,TM8
L2 & L3
Multiple APN
PLMN and Cell Selection
Authentication
USIM and SIM function
QoS
Non-GBR, GBR
MTU Size
Layer 2 - 1,600 bytes
Layer 3 – 1,500 bytes (1,400 bytes - 3GPP recommended)