Telstra EasyCall 2 - Make and Receive a Call

4.2 Make and receive a call
 Enter the phone number using the number keys and press the Green key to dial. If
you enter a wrong digit use the Red Key to delete the mistake. Long press the Red
key to clear all the characters and return to the idle screen.
 Press the * key twice to enter ‘+’ for international dialling.
 Press the * key three times for the Wait symbol ‘W’ which will hold dialling until
the next key is pressed.
 Press the * key four times for the Pause symbol ‘P’ which adds a 3 second delay
into the dialled number.
 Press the Green key to answer an incoming call, press Option > HF on to enable
speaker mode (Handsfree). Press the Red key to end or reject the call.
 If you have set speed dial numbers long press the numeric keys (2, 4 to 9) to dial
the corresponding contact.
 Press the Volume keys to adjust volume during the call.
 Press and hold the 0 key to select the In Call volume level which you can
pre-define. Eg. If your normal ear-piece volume is 3, you can set the In Call volume
setting to 5 which you can use in noisy environments to give a quick volume
boost to the earpiece if required. See Audio Settings for more information.
 Press the Red key to hang-up (End) the call.
18