Telstra EasyCall 2 - Settings > Audio Settings

4.10 Audio Settings
Select Settings > Audio Profiles > Personalise to set the following:
a)
Tone Setup
1. Incoming Call 5. Message Tone
2. Alarms / Reminder 6. Key Tone
3. Power On 7. Alert Tone
4. Power Off
 The Power On / Off tones are played when the phone is switched on or off.
 The volume level for the Power On and Off tone is linked to the Ring Tone
volume.
b) Volume
1. Ring Tone 3. Earphone
2. Key Tone 4. In Call Volume *
 * Settings > Audio Profile > Personalise > Volume > In Call Volume sets a preferred
second volume setting to quick change the standard earpiece volume. This is
activated by long pressing the 0 key during a call.
c) Alert Type
Ring Only Vibrate Then Ring
Vibrate Only Light only
Vibrate and Ring
24