Telstra Easycall 3 - MAKE AND RECEIVE A CALL

16
3.2 MAKE AND RECEIVE A CALL
• Enter the phone number using the number keys and press the Green
key to dial. If you enter a wrong digit use the Red Key to delete. Long
press the Red key to clear all the characters and return to the idle
screen.
• Press the * key twice to enter ‘+’ for international dialling.
• Press the * key three times for the Wait symbol ‘W’ which will hold
dialling until the next key is pressed.
• Press the * key four times for the Pause symbol ‘P’ which adds a 3
second delay into the dialled number.
• Press the Green key to answer an incoming call, press Option > HF on
to enable speaker mode (Handsfree). Press the Red key to end or
reject the call.
• If you have set speed dial numbers long press the numeric keys (2, 4
to 9) to dial the corresponding contact.
• Press the Volume keys to adjust volume during the call.
• Press and hold the 0 key during a call to enable Loud Speaker mode.
See Audio Settings for more information.
• Press the Red key to hang-up (End) the call.