Telstra Easycall 3 - CALL SETTINGS

24
• Select Settings > Phone Setup > 5.LCD Backlight to set the backlight
timeout.
• Select
Settings > Phone Setup > 6.Brightness.
• Select
Settings > Phone Setup > 7.TTY setting – For TTY (Teletype)
equipment used in Australia requires this setting should be Off.
• Select
Settings > Phone Setup > 8.T-mode – Switch On to enable
T-coil support for hearing aids.
• Select
Settings > Phone Setup > 9.Master Reset – Restore factory
settings. The default phone lock code is 0000.
3.13 CALL SETTINGS
• Select Settings > Call Setup > Call Forwarding. Enables your calls to
be diverted to another number when your phone is busy, after no reply,
or unreachable. The default number is your Voicemail service.
• Select
Settings > Call Setup > Call Waiting. If you are on a call you will
be notified of another incoming call. Press
Options - Swap to switch
between the two calls.