TELUS Wireless Router - Connecting via Cable Setup; LAN Port Connection; Establish Connection; Smart Hub Configuration

4 pages

To Next Page

To Previous Page

Step 2 - setting up the Smart Hub

connecting via a cable

1 Connect the yellow Ethernet cable provided to the port marked LAN at the

back of the Smart Hub.

2 Connect the other end of the yellow Ethernet cable to your computer.

3 Wait approximately 30 seconds for the connection to establish.

4 Open your Web browser, type 192.168.20.1 into the address bar and

press enter.

5 Follow the steps to set up your TELUS Smart Hub.

6 After the setup process is completed you will be connected to the Internet.

1 LAN Port