Need help?Do you have a question about the Telwin Doctor Charge and is the answer not in the manual?
Recommendations for placing the charger for optimal and safe operation, ensuring ventilation.
Instructions for properly connecting the charger to the electrical power supply, including grounding.
Steps for preparing the battery before connecting it to the charger, including electrolyte level check.
Detailed procedure for connecting the charger's clamps to the battery terminals, considering polarity.
Guidelines for charging multiple batteries using series or parallel connections, with compatibility notes.
Steps to safely disconnect the charger after the charging cycle is complete.
Procedure for connecting the charger for starter aid function, ensuring correct voltage.
Instructions on how to use the starter aid function, including pre-charge steps.
Steps to follow after the vehicle starting assistance is finished, including disconnection.
Covers battery types (WET, GEL, AGM, etc.), voltage compatibility (6/12/24V), and vehicle applications.
Procedure for calibrating charging cables for accurate voltage readings.
Details the multi-phase Pulse-Tronic charging cycle, including its benefits.
Explains the LCD panel, parameter monitoring, and available functions like Charge, Test, Recovery.
Guide to setting the desired battery voltage for charging using the VOLT button.
Details automatic and manual Pulse-Tronic charging modes and battery type selection.
Procedures for testing battery health, alternator charging capacity, and CCA.
Explains advanced modes like Desulfation and Equalization for battery upkeep.
Describes diagnostic and supply modes for stable power output, used for vehicle electronics.
Functionality for jump-starting vehicles with low batteries, including procedure and current output.
Lists and explains various error and status indicators (AL1-AL9) displayed by the charger on the LCD.
Describes the key pad layout, buttons, LEDs, and signals for immediate understanding of functions.
Guide to setting the desired battery voltage using the keypad's VOLT button.
Details automatic Pulse-Tronic charging and manual Boost function via advanced mode.
Explains the pulse system for recovering sulphated batteries using the keypad model.
Functionality for jump-starting vehicles using the keypad model's START function.
Lists and explains various error and status indicators on the Key Pad model's LEDs and display.
Guidelines for placing the battery charger safely and ensuring ventilation.
Instructions for properly connecting the charger to the electrical power supply, including safety features.
Recommendations for placing the charger for optimal and safe operation, ensuring ventilation.
Instructions for properly connecting the charger to the electrical power supply, including grounding.
Steps for preparing the battery before connecting it to the charger, including electrolyte level check.
Detailed procedure for connecting the charger's clamps to the battery terminals, considering polarity.
Guidelines for charging multiple batteries using series or parallel connections, with compatibility notes.
Steps to safely disconnect the charger after the charging cycle is complete.
Procedure for connecting the charger for starter aid function, ensuring correct voltage.
Instructions on how to use the starter aid function, including pre-charge steps.
Steps to follow after the vehicle starting assistance is finished, including disconnection.
Covers battery types (WET, GEL, AGM, etc.), voltage compatibility (6/12/24V), and vehicle applications.
Procedure for calibrating charging cables for accurate voltage readings.
Details the multi-phase Pulse-Tronic charging cycle, including its benefits.
Explains the LCD panel, parameter monitoring, and available functions like Charge, Test, Recovery.
Guide to setting the desired battery voltage for charging using the VOLT button.
Details automatic and manual Pulse-Tronic charging modes and battery type selection.
Procedures for testing battery health, alternator charging capacity, and CCA.
Explains advanced modes like Desulfation and Equalization for battery upkeep.
Describes diagnostic and supply modes for stable power output, used for vehicle electronics.
Functionality for jump-starting vehicles with low batteries, including procedure and current output.
Lists and explains various error and status indicators (AL1-AL9) displayed by the charger on the LCD.
Describes the key pad layout, buttons, LEDs, and signals for immediate understanding of functions.
Guide to setting the desired battery voltage using the keypad's VOLT button.
Details automatic Pulse-Tronic charging and manual Boost function via advanced mode.
Explains the pulse system for recovering sulphated batteries using the keypad model.
Functionality for jump-starting vehicles using the keypad model's START function.
Lists and explains various error and status indicators on the Key Pad model's LEDs and display.
Guidelines for placing the battery charger safely and ensuring ventilation.
Instructions for properly connecting the charger to the electrical power supply, including safety features.
General| Input Voltage | 230 V |
|---|---|
| Frequency | 50 / 60 Hz |
| Charging Modes | Automatic |
| Protection Features | Reverse polarity protection, Short-circuit protection |
| Power | 180 W |
To Next Page