EasyManua.ls Logo

Temp-Cast 2000 - Section I: Introduction; In this Booklet; Getting Help

Default Icon
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1
Temp-Cast Owner's Manual
September 2012
SECTION I - INTRODUCTION
IN THIS BOOKLET
This manual has been prepared to
help you to operate and maintain
your Temp-Cast fireplace safely and
efficiently, so that it can provide you
with the maximum in performance
and enjoyment.
GETTING HELP
If a question about your fireplace
arises that is not answered by the
Planning Guide, Installation Manual
or this Owner's Manual, please
contact your dealer or the factory at:
TEMP-CAST LLC
8820 Grey Cloud Island Dr S
St. Paul Park, MN 55071
(651) 303-9841
WARRANTY
Temp-Cast Fireplaces are warranted
for a period of 5 years from date of
purchase, except that metal parts
are warranted for 1 year. This
warranty is limited to repair or
replacement of the defective part
only, at the discretion of Temp-Cast
Enviroheat. It does not extend to
removal or replacement of chimneys,
masonry facades or any other
masonry work.
Occasionally, hairline thermal cracks
will occur in the refractory during the
curing process. These are not
structural and do not affect the
safety, performance or durability of
the fireplace and are therefore not
covered by this warranty. However,
if a crack causes a module to be
displaced from its normal position, or
causes the part to separate
completely into 2 or more pieces,
then it may be covered by this
warranty, subject to the limitations
noted elsewhere in this section.
Cracks of any kind in the masonry
facade are invariably caused by an
installation error and are not covered
by this warranty.
The fireplace and its masonry facade
must be installed in accordance with
instructions in the appropriate
installation manual for the model
purchased and operated according
to this booklet.
In order to register the warranty,
please complete the enclosed
Registration Card and mail it to the
factory, within 30 days of installation,
with at least 4 photos (or video) of
the installation, showing -
the completed core with
corrugated spacer
close-up view of the facade
partially installed
over-all view of the completed
fireplace & chimney, taken from
the front
front view of a normal fire,
following the curing process
If you are contracting out the
installation and masonry work, we
suggest that you photograph (or
video) the assembly and
installation process and keep
these for your records.
Read this entire manual before
lighting the first fire and keep it
for future reference.

Other manuals for Temp-Cast 2000