Need help?Do you have a question about the TemperZone SAT-3 and is the answer not in the manual?
Controls the power state of the air conditioner, starting or stopping operation.
Allows users to set and adjust the desired room temperature using dedicated buttons.
Manages air conditioner operation for specific zones, allowing zones to be toggled on or off.
Guides users on how to set the current time and day of the week on the controller.
Explains how to activate or deactivate the timer functions for automated control.
Details the process of configuring timer programs for on/off times and advanced settings.
Lists checks for power, unit status, and timer settings when the unit is unresponsive.
Offers checks for sleep mode, air filter, doors/windows, and eco mode for performance issues.
Guides on verifying operating mode, set temperature, and delay periods for lack of cooling/heating.
Advises on checking clock settings and timer programming for scheduling issues.
Explains how to check for key lock and advanced timer operation when settings are unchangeable.
Indicates damper calibration has not completed in zone systems; resolves upon system restart.
Signifies damper calibration failure due to wiring, motor, or setup errors in zone systems.
Points to a lack of communication between zone and outdoor controllers in zone systems.
Denotes a fault with the SAT-3's internal temperature sensor.
Indicates a fault with the SAT-3's external temperature sensor.
Signifies no communications with the SAT-3 unit controller or zone controller.
Controls the power state of the air conditioner, starting or stopping operation.
Allows users to set and adjust the desired room temperature using dedicated buttons.
Manages air conditioner operation for specific zones, allowing zones to be toggled on or off.
Guides users on how to set the current time and day of the week on the controller.
Explains how to activate or deactivate the timer functions for automated control.
Details the process of configuring timer programs for on/off times and advanced settings.
Lists checks for power, unit status, and timer settings when the unit is unresponsive.
Offers checks for sleep mode, air filter, doors/windows, and eco mode for performance issues.
Guides on verifying operating mode, set temperature, and delay periods for lack of cooling/heating.
Advises on checking clock settings and timer programming for scheduling issues.
Explains how to check for key lock and advanced timer operation when settings are unchangeable.
Indicates damper calibration has not completed in zone systems; resolves upon system restart.
Signifies damper calibration failure due to wiring, motor, or setup errors in zone systems.
Points to a lack of communication between zone and outdoor controllers in zone systems.
Denotes a fault with the SAT-3's internal temperature sensor.
Indicates a fault with the SAT-3's external temperature sensor.
Signifies no communications with the SAT-3 unit controller or zone controller.
General| Brand | TemperZone |
|---|---|
| Model | SAT-3 |
| Category | Thermostat |
| Language | English |
To Next Page
