Maintenance Procedures
Proper maintenance is necessary to ensure that
your ®Tempest Power Blower operates as
efficiently and trouble-free as possible. By
following the instructions in this section you will
be providing the maintenance needed to achieve
this goal.
CAUTION: THE ENGINE MAY START
SIMPLY BY ROTATING THE BLADES.
ALWAYS REMOVE THE SPARK PLUG WIRE
PRIOR TO WORKING ON THE BLADE SIDE
OF THE MOTOR.
OIL CHANGE
Oil Filler Ca
Check the engine oil level before each use. The
oil should be changed after the first three (3)
operating hours and every 50 hours thereafter. Oil
changes should be performed more frequently if
the blower is being operated in dusty or dirty
conditions. Changing the oil is easier when the
engine is still warm (not hot) from a recent
running.
PROCEDURES
1. Position the blower so the engine oil drain plug
is the lowest point on the engine.
2. Place a two quart or larger container under the oil
drain plug for the oil to drain into.
3. Remove the oil drain plug.
4. Install the oil drain plug and tighten securely.
Maintenance 5.1
To Next Page
Loading...
