EasyManua.ls Logo

TEMPUR ARC Static - Fire Safety and Installation Procedures; Cleaning and Maintenance Advice

TEMPUR ARC Static
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
Fire safety
TEMPUR ARC™ Bed Range products comply with applicable safety standards, which may vary
depending on the product or the region. Further information is available upon request.
Carelessness causes re - we strongly recommend not to smoke in bed.
WARNING
Risk of re: keep products away from open ames
Installation
For a correct and safe installation, PLEASE SEE THE ASSEMBLY GUIDES FOR FURTHER
INSTALLATION INSTRUCTIONS.
Cleaning and maintenance
A clean bedroom can have a big impact on your sleeping environment and therefore sleep
quality.
To ensure the preservation of your bed’s appearance, we recommend regular vacuuming
with a soft tting, preferably once a week. This gently removes the dust from the surface
without damaging the textile and reduces dust collection.
IMPORTANT
Always remove stains as quickly as possible before it penetrates the bers. This
may result in a permanent stain.
Avoid soaking as this can seep through the fabric and damage the underlying
material.
DO NOT rub the material too hard to remove a stain as this may damage the
material.
NOTICE
If liquid spills, absorb as much of the liquid as possible with a plain white kitchen
paper towel or cotton cloth to avoid a permanent stain.
Most spots can be removed with lukewarm water, possibly with a pH-neutral
dishwashing detergent.
If a stain or spot has dried, remove as much as possible by vacuuming with a soft
brush tting.

Related product manuals