TS35
|
17
03 TECHNICAL
INSTRUCTIONS
TS35-U06 / Rev. 00 / 22.06.12
12.Dismantle the 33-05 cable in MOKI pin D5.
Photo 36
Photo 37
13.Connect this 33-05 to MOKI pin 19 in-case of
terminal failure while dismantling you can cut
and re-terminal cable.
14.Connect MOKI D connector to MOKI.
15.Load BS_02_18 program to vehicle.
16.Check if door control button is working
ignition on positon and ignition off position.
17.Then mount switches and covers to their
places.
To Next Page
Loading...
