9
Mode display
① The S1 has four working modes, and you can switch the working mode by pressing the
Mode button after power on.
Smart mode
Embedded sensor automatic control algorithm, taking into account the dynamic balance
of data detection and product battery life, to provide users with a good experience!
Real-time mode
Real-time collection of temperature, humidity and particulate matter data on the device;
Note: The data is collected about 1.5 seconds for particulate matter, and about 5 seconds for
temperature and humidity.
2.Display
A
R
Mode Button:
1.Short press to switch between the
work mode (4 dierent types)
2.Long press to switch between the
temperature unit (
°F
/
°C
)
To Next Page
Loading...