Temtop S1 - Battery Status and Charging

1) When the battery is displayed as
empty, please charge it in time, and
the charging icon will be displayed
when charging.
2)When the battery power is extremely
low, the battery icon will flash 3 times
and then shut down.
Power display
Charging icon
USB interface
10
⑤ Interval Mode (5min)
1) PM2.5 Sensor works every 5 minutes;
2) The temperature and humidity are still maintained for 1 minute to refresh.
Power-saving Mode (30min)
1) PM2.5 Sensor works every 30 minutes;
2) The temperature and humidity are still maintained for 1 minute to refresh.
② S1 monitoring function
30