Tenda 4G03 - Set up the router

1
 Use the included power adapter to connect the PWR jack of the router to a power
source.
 Press the ON/OFF button down to turn on the router. The LED indicator lights
up.
Wait a few seconds. The router is connected to the internet when the LED
indicator lights up.
 Insert a SIM card into the slot on the bottom panel of the router.
1
1
2
2
3
3
ON/OFF PWR RST/WPS WAN/LAN LAN
12345A
6789
+
+
Mini SIM card Nano SIM card + adapterMicro SIM card + adapter
✓ ✓✓
English
I. Set up the router
Tips:
If the LED indicator does not light up, refer to Q1 in FAQ.