Need help?Do you have a question about the Tenda FH456 and is the answer not in the manual?
General| Wi-Fi band | - |
|---|---|
| Wi-Fi standards | 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
| Top Wi-Fi standard | Wi-Fi 4 (802.11n) |
| WLAN data transfer rate (max) | 300 Mbit/s |
| xDSL connection | No |
| Bandwidth (first) | 2.4 GHz |
| Antennas quantity | 4 |
| Antenna gain level (max) | 5 dBi |
| Product type | Tabletop router |
| Product color | White |
| LED indicators | System, WAN, WPS |
| Reset button | Yes |
| Output current | 0.6 A |
| Output voltage | 9 V |
| AC input voltage | 100 - 240 V |
| Power source type | AC |
| AC input frequency | 50 - 60 Hz |
| Security algorithms | AES, TKIP, WPA, WPA2-PSK |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | 0 - 40 °C |
| Storage relative humidity (H-H) | 5 - 90 % |
| Operating relative humidity (H-H) | 10 - 90 % |
| Certification | CE / RoHS / FCC / EAC / NOM / UKrSEPRO |
| Cables included | LAN (RJ-45) |
| Networking standards | IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.3, IEEE 802.3u |
| Ethernet LAN data rates | 10, 100 Mbit/s |
| Ethernet LAN interface type | Fast Ethernet |
Weight and Dimensions| Depth | 36.4 mm |
|---|---|
| Width | 171.3 mm |
Instructions for connecting the router to the internet and devices.
Steps to access and log into the router's web-based configuration interface.
Configuration of internet connection types like PPPoE, Dynamic IP, and Static IP.
Instructions on how to connect devices to the router's Wi-Fi network.
Configure different types of internet connections (PPPoE, Dynamic IP, Static IP).
Manage wireless network settings like SSID, password, security, and signal strength.
Control download/upload speed for connected devices to optimize network performance.
Extend Wi-Fi signal range using WISP or Universal Repeater modes.
Set time limits and website restrictions for specific devices on the network.
To Next Page
