Specify Additional Settings
❶ Select Enable button to enable the feature.
❷ Enter the IP address of your computer (for example: 192.168.0.100 here. It is the IP address of the
computer with DMZ host created) in the Host IP field.
Click OK on the bottom of the page to activate your settings.
Note
Once enabled, the DMZ host loses protection from the firewall and becomes vulnerable to Internet
attacks. If you do not need to use DMZ host, disable it as soon as possible.
DDNS
Generally, Internet service providers (ISPs) assign IP addresses to identify each Internet account.
Most ISPs use dynamically assigned IP addresses. It means that the IP address can change at any time.
So when you use some WAN IP-based features, such as Port Forwarding, and etc., you cannot know
the WAN IP of your Router. To solve the problem, you can use DDNS feature.
Register a free DDNS account, and set up your Router to use this account.
Configuration
Login to the Router’s User Interface, click Advanced.
If you don’t register a free DDNS account, click Register Now to get one.
If you already have a DDNS account, follow the steps below to set up the Router.
To Next Page
Loading...
