Tenda S108

Copyright Statement
is the registered trademark of Shenzhen Tenda
Technology Co., Ltd. All the products and product names mentioned
herein are the trademarks or registered trademarks of their respective
holders. Copyright of the whole product as integration, including its
accessories and software, belongs to Shenzhen Tenda Technology Co.,
Ltd. Without the permission of Shenzhen Tenda Technology Co., Ltd, any
individual or party is not allowed to copy, plagiarize, imitate or translate it
into other languages.
All the photos and product specifications mentioned in this guide are for
references only. As the upgrade of software and hardware, there will be
changes. And if there are changes, Tenda is not responsible for informing
in advance. If you want to know more about our product information,
please visit our website at www.tendacn.com

Tenda S108 Specifications

General

Standards	IEEE 802.3, IEEE 802.3u
Switching Capacity	1.6 Gbps
MAC Address Table	1K
Power Supply	External Power Adapter
Ports	8 x 10/100Mbps
Forwarding Rate	1.488 Mpps

Summary

Introduction to Tenda Switch

Switch Features Overview

Details switch features like IEEE standards, auto-negotiation, ports, and flow control.

Package Contents List

Lists the items included in the product package, such as the switch, power adapter, and user guide.

Front and Rear Panel Specifications

Describes the indicators on the front panel and ports on the rear panel of the switch.

LED Indicator Status Explanations

Explains the meaning and status of LED indicators like Power and Link/Act.

Network Installation Guide

Pre-connection Network Setup

Provides instructions and precautions before connecting the switch to the network.

Connecting to End Nodes

Explains how to connect end devices to the switch using Ethernet cables.

Connecting to Router or Switch

Illustrates how to connect the switch to a router or another switch in a network.

Product Specifications Details

FCC Compliance Statement

Customer Support Information