Do you have a question about the Tenda Nova MW6 and is the answer not in the manual?
DSL WAN | - |
---|---|
Ethernet WAN | Yes |
Wi-Fi band | Dual-band (2.4 GHz / 5 GHz) |
Wi-Fi standards | 802.11a, Wi-Fi 5 (802.11ac), 802.11b, 802.11g, Wi-Fi 4 (802.11n) |
Top Wi-Fi standard | Wi-Fi 5 (802.11ac) |
WLAN data transfer rate (max) | 867 Mbit/s |
Networking standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE 802.11r, IEEE 802.11v, IEEE 802.3, IEEE 802.3ab |
Ethernet LAN interface type | Gigabit Ethernet |
Ethernet LAN (RJ-45) ports | 2 |
Security algorithms | WPA2-PSK |
Product type | Tabletop router |
Product color | White |
Output current | 1.5 A |
Output voltage | 12 V |
AC input voltage | 100 - 240 V |
Power source type | AC, PoE |
AC input frequency | 50 - 60 Hz |
Package depth | 175 mm |
Package width | 357 mm |
Package height | 115 mm |
Package weight | 2050 g |
Storage temperature (T-T) | -40 - 70 °C |
Operating temperature (T-T) | 0 - 40 °C |
Storage relative humidity (H-H) | 5 - 90 % |
Operating relative humidity (H-H) | 10 - 90 % |
Quantity per master (outer) case | 3 pc(s) |
Width | 100 mm |
---|---|
Weight | 410 g |
Identifies LAN, WAN/LAN ports, DC power jack, and reset button on the nova unit.
Connects the modem to the first nova unit via Ethernet and power for initial setup.
Guide to download and install the Tenda WiFi mobile application for device setup.
Steps to connect the primary nova unit to the internet using the Tenda WiFi app and LED status.